Contents - declaration of conformity
- safety instructions
- Table Of Contents
- Table Of Contents
- Chapter 1 General Information
- Introduction
- LAN Function
- LCD Specifications
- Optional Modules
- Dimensions
- Chapter 2 System Setup
- Quick Tour
- Installation Procedures
- BIOS Setup Utility
- System Software Installation
- mSATA Card Installation
- WLAN Installation
- Jumpers and Connectors
- Jumper and Connector Functions
- Jumper and Connector Locations
- Jumpers
- Table 4.5: JP4(D), JP5(EG), JP7(F): AT/ATX Power SEL
- Table 4.8: JCASH1: Cash Drawer Power SEL
- Table A.1: CN1(DE), CN2(FG): Backlight
- Table A.3: CN4(DEFG): LVDS
- Table A.4: CN4(G): LVDS
- Table A.5: CN5(D), CN3(EF): eDP
- Table A.6: CN3(G): eDP
- Table A.7: CN11(DF), CN10(G): VGA
- Table A.9: CN7(D), CN3(EFG): SATA Power
- Table A.11: CN9(D), CN6(EG), CN26(F): Touch
- Table A.14: MINIPCIE1(DEF): Mini PCIE
- Table A.15: MSATA1(DEFG): mSATA
- Table A.16: CN14(D), CN10(F), CN7(G): COM4
- Table A.17: CN15(D), CN13(E), CN12(F), CN11(G): COM3
- Table A.19: CN18(D), CN14(E), CN15(F), CN13(G): COM1
- Table A.21: CN22(D), CN15(E), CN16(FG): Speakers
- Table A.23: CN23(D), CN17(EFG): LAN1/LAN2
- Table A.24: CN19(EF), CN21(G): External USB
- Table A.25: CN20(EF), CN22(G): External USB
- Table A.26: CN24, CN25 (D), CN18(EF), CN20(G): External USB
- Table A.27: CN26(D): External USB
- Table A.28: CN27(D), CN21(E), CN22(F), CN25(G): Line-Out
- Table A.30: CN30(D), CN24(EF), CN27(G): HDMI
- Table A.31: CN31(DG), CN25(EF): DC-In
- Table A.33: Power Button
| 
9 UTC-318 User ManualChapter 2 System SetupA. COM port B. Line-OutC. Mic-In D. Gigabit LAN x 2E. HDMI F. 4 x USB 3.0, 2 x USB 2.0 (UTC-318E/F/G)G. RJ11 1 x USB 3.0, 5 x USB 2.0 (UTC-318D)I. DC-In H. Power button2.2 Installation Procedures2.2.1 Connecting the Power CordUTC-318 can be powered by a DC electrical outlet. When handling power cords,ensure to only hold the plug ends. Please refer to Figure 2.3 when connecting themale plug of the power cord to the UTC-318 DC inlet.2.2.2 Connecting a Keyboard or MouseBefore powering on the device, connect a keyboard or mouse to the relevant port inthe I/O section.2.2.3 Switching On the PowerThe power button is located at the rear of the UTC-318, as shown in Figure 2.3.Figure 2.3 Connecting the Power Cord to the DC Inlet |
