Contents - declaration of conformity
- safety instructions
- Table Of Contents
- Table Of Contents
- Chapter 1 General Information
- Introduction
- LAN Function
- LCD Specifications
- Optional Modules
- Dimensions
- Chapter 2 System Setup
- Quick Tour
- Installation Procedures
- BIOS Setup Utility
- System Software Installation
- mSATA Card Installation
- WLAN Installation
- Jumpers and Connectors
- Jumper and Connector Functions
- Jumper and Connector Locations
- Jumpers
- Table 4.5: JP4(D), JP5(EG), JP7(F): AT/ATX Power SEL
- Table 4.8: JCASH1: Cash Drawer Power SEL
- Table A.1: CN1(DE), CN2(FG): Backlight
- Table A.3: CN4(DEFG): LVDS
- Table A.4: CN4(G): LVDS
- Table A.5: CN5(D), CN3(EF): eDP
- Table A.6: CN3(G): eDP
- Table A.7: CN11(DF), CN10(G): VGA
- Table A.9: CN7(D), CN3(EFG): SATA Power
- Table A.11: CN9(D), CN6(EG), CN26(F): Touch
- Table A.14: MINIPCIE1(DEF): Mini PCIE
- Table A.15: MSATA1(DEFG): mSATA
- Table A.16: CN14(D), CN10(F), CN7(G): COM4
- Table A.17: CN15(D), CN13(E), CN12(F), CN11(G): COM3
- Table A.19: CN18(D), CN14(E), CN15(F), CN13(G): COM1
- Table A.21: CN22(D), CN15(E), CN16(FG): Speakers
- Table A.23: CN23(D), CN17(EFG): LAN1/LAN2
- Table A.24: CN19(EF), CN21(G): External USB
- Table A.25: CN20(EF), CN22(G): External USB
- Table A.26: CN24, CN25 (D), CN18(EF), CN20(G): External USB
- Table A.27: CN26(D): External USB
- Table A.28: CN27(D), CN21(E), CN22(F), CN25(G): Line-Out
- Table A.30: CN30(D), CN24(EF), CN27(G): HDMI
- Table A.31: CN31(DG), CN25(EF): DC-In
- Table A.33: Power Button
| 
UTC-318 User Manual 204.1 Jumpers and Connectors4.1.1 Setting JumpersUsers can configure UTC-318 according to their specific application requirements bysetting jumpers. A jumper is the simplest type of electrical switch and consists of twometal pins and a small metal clip (typically protected by a plastic cover) that slidesover the pins to connect them. To close a jumper, connect the pins with the clip. Toopen a jumper, simply remove the clip. Some jumpers have three pins, labeled 1, 2,and 3. With this type of jumper, connect either Pins 1 and 2, or Pins 2 and 3.open closed closed 2-3The jumper settings are schematically depicted below.open closed closed 2-3A pair of needle-nose pliers may be helpful when working with jumpers. If you haveany concerns regarding the optimum hardware configuration for your application,contact your local distributor or sales representative before making any changes. |
