16PixLite 16 Older Revs User Manual V1.7 © 2015 Advatek Lights Pty Ltd7. – Specifications7.1 - Operating SpecificationsThe table below specifies the recommended operating conditions for a PixLite 16 controller.PARAMETER VALUE/RANGE UNITS TOLERANCEPower Bank Input 5-30 V DC +/-5%Max Capacity PerPower Bank32 A +/-5%Logic CurrentConsumption (@ 5V)DC)150 mA +/-10%OperatingTemperature-10 to +60 °C +/-5%Individual Outputs(Max)7 A NATable 17.2 - Mechanical SpecificationsThe control board dimensions are as shown below in Figure 15 on the following page.

Introduction

Installation

Control Data

Lights

Network Configuration

Using A Switch/Direct

Forcing the Default IP Address

Hardware Test Pattern

Performing a "Forced Boot" Update

Specifications

Troubleshooting

Other Issues

Advatek Lights PIXLITE 16 User Manual

PIXLITE 16