Aviom 6416YZ User Manual
Also see for 6416YZ: User guide
                                                                | |
Contents
| 
A bout Your P ro 64 P roductPackage ContentsCheck the contents of the shipping box carefully before makingconnections and continuing with installation.The contents of the 6416Y2 A-Net Interface Card box includes:One 6416Y2 A-Net Interface CardUser GuideP Note Retain the protective bag that encloses the 6416Y2 card. Thecard is static-sensitive. Use the bag whenever the card willbe transported without being installed in a Yamaha device.The EtherCon ConnectorPro64 Series products feature locking connectors for all network I/O.The Neutrik® EtherCon® connector is a dual RJ45-type connector thatcan receive a standard Category 5e cable or a cable fitted with thespecial locking EtherCon connector.When using a standard Cat-5e cable, plug the cable into the center ofthe EtherCon jack; release the cable by pressing on the small plastic tabbuilt into the cable connector.The locking EtherCon connector is similar to an XLR plug, the kindcommonly used on microphone cables. Insert an EtherCon-equippedcable into the jack until it clicks and locks in place. To remove the cable,press on the metal release tab at the top of the panel-mounted EtherConjack and pull the connector outward.RS–232/422STEREO LINK6416Y2B AONCTLCLKAUTO ERR1 2 3 4 5 6 7 8 9 10 11 12The 6416Y2 has two A-Net ports, labeled A and B.Cat-5e CablesAll Cat-5e connections between A-Net devices should use UnshieldedTwisted Pair (UTP) cable. The cable can be of the stranded or solid type;solid wire performs better over long distances, while stranded wire is•• |
Related manuals for Aviom 6416YZ
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine