8-88.3 Replacing the Snap-in Pad ModuleAfter scanning approximately 20,000 pages through the ADF,the pad may be worn out and you may experience problemswith document feeding. In this case, it is highly recommendedto replace the pad module with a new one. For ordering thepad module, please consult your nearest dealer and follow theprocedure below to replace it.Disassembling Procedure1. Press the Paper jam clearing button on the upper-leftcorner.2. Gently open the ADF Front cover to the left.3. Press both arms of the ADF snap-in pad module inwardlywith your fingers to pull out the ADF snap-in pad module.Assembling Procedure1. Take out the ADF pad module from the box.2. Press both arms of the ADF snap-in pad module inwardlywith your two fingers.3. Place it into the holes until it snaps into place.
