User’s Manual7-77.4 Connect to a wireless access point using the WPSbuttonYou may connect the scanner to a WPS compatible wirelessaccess point by pressing the WPS button on the back of thescanner.Before You Begin!To enable the WPS connection of your access point, pleaserefer to the user’s guide of your access point.Perform the following procedure to connect.1. Confirm your wireless access point/router has the WPS orAOSSTM symbol as shown below.2. Press the WPS button of your wireless access point. (You mayrefer to the user’s guide of your access point/router forinstructions on how to use the WPS button.)

Avision AD340GWN User Manual