Avision AN240W User Manual
Also see for AN240W: Getting started
                                                                                                                                                                            | |
Contents
| 
16Specifying the Product’s TCP/IP AddressTo let other devices on the network identify the product, you need to set an IPaddress for the product. Follow these steps to set an IP address:1. On the Home Screen of the LCD Touch Panel, tap[Settings]>[Network]>[Wired] in succession and then set the IP addressfor the product.- Check [DHCP] if you wish to enable DHCP.- Check [Static IP] if you wish to specify a static IP address. If [StaticIP] is selected, tap the IP Address/Subnet Mask/GatewayIP/DNS Server field respectively to bring up the soft keyboard andthen enter the relevant values.2. Tap [Save] to save the setting and go back to the previous screen.Note: If the system administrator has chosen DHCP, then the IP address of TCP/IP,gateway, subnet mask, and DNS server will be automatically given. When installing the product for the first time, it is recommended that theAdministrator retain the default system settings. The settings can becustomized at a later date once you are familiar with the operation andfunctionality.SettingsNetwork |
Related manuals for Avision AN240W
manualsdatabase
Your AI-powered manual search engine