User’s Manual7-27.2 Error ConditionsIf there is error during scanning, the LED light will be flashing inred color and error codes will be displayed. Refer to the followingtable to clear the error conditions.ErrorCode/MeaningCause How to restoreE04Paper jam1. Original hasbecome stuck inthe feeder.2. Original exceedsmax. length[300 dpi: 36”(914mm), 600dpi: 14”(356mm)]Open the feedercover and pull theoriginal out of thefeeder.E06Cover opensFeeder cover opens. Close the feedercover.E19Calibration FailsInternal check failedand foundcalibration dataerrorRecalibrate thescanner (see the“Calibrate Scanner”section.* Warning:If "low battery" ( ) is indicated on the LCD display, it isrecommended to recharge the battery to prevent possibleincomplete scanned images or other operational problems.
