User’s Manual4-50Pre-FeedChoice: Enable, Disable. If enable is selected, you can set theamount of time the scanner starts pre-feeding your paper afteryour documents has been loaded into the feeder. The default isdisabled. Note: The availability of this option varies due toscanner model.Transport TimeoutSet the amount of time the scanner will wait and then startauto scan after the first scan job is completed. If you havemany separate documents need to be scanned at the samescan settings, this feature is especially useful. The default is 0.The value ranges from 0 to 30 seconds.Note:1 Within the specified timeout period, if you load yourdocument to the feeder, the scanner starts scanningautomatically.2 If your scanner has a flatbed option and you place yourpaper on the flatbed, after the timeout period, you needto click the Scan button on the TWAIN user interface tostart scanning.
