Axis 01979-001 User Manual
Also see for M11 Network Camera Series: User manualUser manualUser manualInstallation guideUser manual
                        |
AXIS M11 SeriesSpecificationsDigital Input 3 Connect to pin 1 to activate, or leave floating (unconnected)to deactivate.0 to max 30 V DCDigital Output 4 Internally connected to pin 1 (DC ground) when active,and floating (unconnected) when inactive. If used with aninductive load, e.g., a relay, connect a diode in parallel withthe load, to protect against voltage transients.0 to max 30 V DC, open drain,100 mAExample1 DC ground2 DC output 12 V, max 25 mA3 Digital input4 Digital outputPower connector2-pin terminal block for DC power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with eithera rated output power limited to ≤100 W or a rated output current limited to ≤5 A.22 |
Related manuals for Axis M11 Network Camera Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine