Section 4: Printing from Windows NT 3.5 (TCP/IP) User’s Manual32Section 4 Printing from Windows NT 3.5 (TCP/IP)This section describes how to install the AXIS OfficeBasic forTCP/IP printing on Windows NT3.5x clients.Before you begin ❏ Make sure that the TCP/IP protocol is enabled on yourWindows client.Installation Steps To complete the installation you need to perform the followingsteps:• Physically connect the AXIS OfficeBasic to your network andassign an ip address to the print server. See HardwareInstallation and IP address assignment, on page 12.• Install the AXIS Print Monitor software on your client. Pleaserefer to page 33.• Integrating the AXIS OfficeBasic in your network andinstalling the TCP/IP printer ports on your client. Please refer topage 35.
