Axis 16852 User Manual
                                                             | |
Contents
| 
User’s Manual Section 4: Printing from Windows NT 3.5 (TCP/IP) 35Installing TCP/IP Printer PortsFollow the instructions below to integrate the AXIS OfficeBasic inyour network and to install TCP/IP printer ports on your WindowsNT 3.5x clients:Important! ❏ If you have already assigned an IP address to your AXISOfficeBasic, proceed with step 6 in the instructions below.1. Start AXIS IP Installer.2. Click the serial number of your AXIS OfficeBasic when itappears in the server list. Restart the AXIS OfficeBasic, if itdoes not show up in the server list.3. Enter an unused IP address in the designated IP address fieldand click the Set IP address button.4. The IP setting process will take approximately 10 to 40seconds. Click OK in the confirmation box that appears whenthe IP address has been set.5. Close the AXIS IP Installer.6. Open the Windows NT 3.5x Print Manager and select CreatePrinter from the Printer menu.7. Enter an appropriate name in the Printer Name field.8. Select Other... in the driver list. Insert the printer driverdiskette/CD that was provided with your printer, select thediskette/CD drive and click OK.9. Select the printer driver you want to install.10. Select Other... from the “Print to” drop-down list.11. Select AXIS Port from the list of available Print Monitors inthe Print Destination dialog. Click OK.12. Select LPR (TCP/IP) as your choice of network protocol andclick OK. |
Related manuals for Axis 16852
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine