Axis 207 User Manual

Also see for AXIS 207: User manual Specifications Product guide Installation guide Specification

Axis 207 User Manual Manual pdf 33 page image

33AXIS 207 - System OptionsNote that DSCP values can be entered in decimal or hex form, but saved values are alwaysshown in decimal.For more infomation on Quality of Service, please see the Axis support web atwww.axis.com/techsupSMTP (email)Enter the host names (or IP addresses) and port numbers for your primary and secondarymail servers in the fields provided, to enable the sending of notifications and image/videoemail messages from the camera to predefined addresses via SMTP.If your mail server requires authentication, check the box for Use authentication to log into this server and enter the necessary information.UPnP™The AXIS 207 includes support for UPnP™, which is enabled by default. If also enabled onyour computer, the camera will automatically be detected and a new icon will be added to“My Network Places.”Note: UPnP must also be enabled on your Windows XP or ME computer. To do this, open the Control Panel fromthe Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and openthe Networking Services section. Click Details and then select UPnP as the service to add.RTP / MPEG-4These settings are the port range, IP address, port number (video and audio), andTime-To-Live value to use for the video stream(s) in multicast MPEG-4 format. Onlycertain IP addresses and port numbers should be used for multicast streams. For moreinformation, please see the online help.BonjourThe AXIS 207 includes support for Bonjour. When enabled, the camera is automaticallydetected by operating systems and clients that support this.Ports & DevicesI/O Ports - the pinout, interface support and the control and monitoring functionsprovided by this connector are described in The I/O Terminal Connector, on page 36.LED SettingsThe Status indicator LED on the front of the camera can be set to flash at a configurableinterval (or to not light up at all) whenever the unit is accessed. For a listing of all LEDbehavior, see page 8, or the online help.