Axis 210 User Manual

Also see for Axis 210: User manual Specifications Product guide Installation guide Installation guide

Axis 210 User Manual Manual pdf 13 page image

13AXIS 210/211 - Manual Installation with ARP/Ping5. A message confirming that the IP address has been set will be displayed. Click OK.6. Click View Home Page to access the camera’s web pages.7. See page 15 for instructions on how to set the password.Note:Manual Installation with ARP/Ping1. Acquire an unused IP address for the AXIS 210/211. This IP address must be on thesame subnet as your computer.2. Locate the serial number (S/N) on the camera’s underside label.3. From a computer on your network, open a Command Prompt (in Windows: from theStart menu, select Run... and type cmd in the field. Click OK).4. As appropriate for your operating system, enter the following commands:5. Check that the network cable is connected. Start/restart the camera by disconnectingand reconnecting the power cable, or the network cable if using PoE (AXIS 211 only).6. Close the Command prompt when you see ‘Reply from 192.168.0.125: ...’7. The IP address has been set when the Power indicator is permanently lit and theNetwork indicator flashes intermittently.8. Start your browser, enter the IP address of the camera in the Location/Address field andpress Enter on your keyboard. See below for instructions on how to set the password.Note:After installation, the One-click installation method can be used to obtain a DNS name for the AXIS210/211.Windows syntax: Windows example:arp -s Address> Number>ping -l 408 -t arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125UNIX/Linux/Mac syntax: UNIX/Linux/Mac example:arp -s tempping -s 408 Address>arp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 192.168.0.125After installation, the One-click installation method can be used to obtain a DNS name for the AXIS210/211.