Axis 210A User Manual
Also see for Axis 210: User manualSpecificationsProduct guideInstallation guideInstallation guide
                                                                            | |
Contents
| 
11AXIS 210A/211A - Accessing the CameraFocusingTo focus the AXIS 210AUnscrew the focus puller on the lens.Adjust the focus as required. Re-tighten thefocus puller.To focus the AXIS 211AFollow the instructions below.1. From the Basic Configuration pagein your browser, open the Focusadjustment page.2. Set the DC-Iris to Disabled and clickSave.3. Unscrew the zoom puller on the lensby turning it anti-clockwise. Adjustthe zoom setting as required.Re-tighten the zoom puller.4. Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten.5. From the Focus adjustment page, set the DC-Iris to Enabled and click Save.Note: The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, whichgives the smallest depth of field and thus the best conditions for correct focusing. When the focus is setwith this method it is maintained in any light condition.AXIS 210AFocus pullerAXIS 211AFocus pullerZoom puller(Tele/wide) |
Related manuals for Axis Axis 210
manualsdatabase
Your AI-powered manual search engine