Axis 211 Installation Manual
Also see for 211M: SpecificationsProduct guideDatasheetBrochure & specsDatasheet
                                                                | |
Contents
| 
Page 10 AXIS 211M Installation GuideAdjust the image and focusTo focus the AXIS 211M follow the instructions below.1. From the Basic Configuration pagein the setup tools, open the Focusadjustment page.2. Set the DC-Iris to Disabled and clickSave.3. Unscrew the zoom puller on the lensby turning it anti-clockwise. Adjustthe zoom setting as required. Re-tighten the zoom puller.4. Unscrew the focus puller on the lens.Adjust the focus as required. Re-tighten the focus puller.5. From the Focus adjustment page, set the DC-Iris to Enabled and click Save.Note: The DC-Iris should always be disabled while focusing the camera. This opens theiris to its maximum, which gives the smallest depth of field and thus the bestconditions for correct focusing. When the focus is set with this method it willthen be maintained in any light conditions.Accessing the AXIS 211M from the InternetOnce installed, your AXIS 211M is accessible on your local network (LAN). To access thecamera from the Internet, network routers must be configured to allow incoming traffic,which is usually done on a specific port. Please refer to the documentation for your routerfor further instructions. For more information on this and other topics, visit the Axis SupportWeb at www.axis.com/techsupFocus pullerZoom puller(Tele/wide) |
Related manuals for Axis 211M
manualsdatabase
Your AI-powered manual search engine