Axis 211W Installation Manual
Also see for 211W: SpecificationsProduct guideInstallation guideSpecificationsInstallation guide
                                                                                    | |
Contents
| 
Page 18 AXIS 211W Installation GuideResetting to the Factory Default SettingsThis will reset all parameters, including the IP address, to the Factory Default settings:1. Disconnect power from the camera.2. Press and hold the Control button and reconnect power.3. Keep the Control button pressed until the Status indicator displays amber (this may takeup to 15 seconds), then release the button.4. When the Status indicator displays green (which can take up to 1 minute) the process iscomplete and the camera has been reset.5. Re-assign the IP address, using one of the methods described in this document.It is also possible to reset parameters to the original factory default settings via the webinterface. For more information, please see the online help or the user’s manual.Further informationThe user’s manual is available from the Axis Web site at www.axis.com or from the AxisNetwork Video Product CD supplied with this product.Tip!Visit www.axis.com/techsup to check if there is updated firmware available for yourAXIS 211W. To see the currently installed firmware version, see the BasicConfiguration web page in the product’s Setup tools. |
Related manuals for Axis 211W
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine