Axis 211W Installation Manual

Also see for 211W: Specifications Product guide Installation guide Specifications Installation guide

Contents

Axis 211W Installation Manual Manual pdf 5 page image

AXIS 211W Installation Guide Page 5ENGLISHENGLISHInstall the hardwareConnect the cables and antenna1. For indoor use, attach the antenna by screwing it into place. For outdoor use see the out-door housing instructions.2. Connect the camera to the network using a shielded network cable. This connection istemporary and allows the camera’s settings to be configured via the wired networkbefore connecting to the wireless network.3. Optionally connect external input/output devices, e.g. alarm devices. See page 16 forinformation on the terminal connector pins.4. Optionally connect an active speaker and/or external microphone.5. Connect power, using one of the methods listed below:• The supplied power connector.• PoE (Power over Ethernet). If available, this is automatically detected when thenetwork cable is connected (see above).• Connect power via the terminal connector. See page 16 for information on theterminal connector pins.6. Check that the indicator LEDs indicate the correct conditions. See the table on page 17for further details. Note that some LEDs can be disabled and may be unlit.! IMPORTANT! - The AXIS 211W is designed for indoor and outdoor use. To usethe camera outdoors, it must be installed in an approved outdoor housing.Please see www.axis.com for more information on outdoor housings.