Axis 212 PTZ Installation Manual

Also see for AXIS 212 PTZ: Specifications Product guide Datasheet Installation guide Product review guide

Contents

Axis 212 PTZ Installation Manual Manual pdf 15 page image

AXIS 212 PTZ/-V Installation Guide Page 15ENGLISHAccessing the AXIS 212 PTZ/-V from the InternetOnce installed, your AXIS 212 PTZ/-V is accessible on your local network (LAN). To access thecamera from the Internet, network routers must be configured to allow incoming traffic, which isusually done on a specific port. Please refer to the documentation for your router for furtherinstructions.For more information on this and other topics, please visit the Axis Support Web at www.axis.com/techsupResetting to the Factory Default SettingsThis will reset all parameters, including the IP address, to the Factory Default settings:1. Disconnect power from the camera.2. Press and hold the control button and reconnect power.3. Keep the control button pressed until the Status Indicator displays amber (this may take up to15 seconds).4. Release the control button.5. When the Status Indicator displays green (which can take up to 1 minute) the process iscomplete and the camera has been reset.6. Re-install AXIS 212 PTZ/-V using one of the methods described in this document.More informationIt is also possible to reset all parameters, except the IP parameters, to the original factory settingsvia the web interface. For more information, please refer to the online help and the user’s manual.The AXIS 212 PTZ/-V User’s Manual is available from the Axis Web site at www.axis.com or from theAxis Network Video Product CD.