Axis 213 PTZ User Manual

Axis 213 PTZ User Manual Manual pdf 9 page image

9AXIS 213 - Accessing the cameraSetting the Password1. When accessing the camera forthe first time, the ‘ConfigureRoot Password’ dialog will bedisplayed on the screen.2. Enter a password and thenre-enter it, to confirm thespelling. Click OK.3. The ‘Enter Network Password’ dialog will appear. Enter the User name: rootNote: The default administrator user name root is permanent and cannot bedeleted or altered.4. Enter the password as set in step 2 above, and click OK. If the password islost, the camera must be reset to the factory default settings. See page 50.5. If required, click Yes to install the AXIS Media Control (AMC). You will needadministrator rights on the computer to do this.Accessing the camera from the InternetOnce installed, the camera is accessible on your local network (LAN). To access the camera from the Internet youmust configure your router/firewall to allow incoming data traffic. For security reasons this is usually done on aspecific port. Please refer to the documentation for your router/firewall for further instructions.For more information, please visit the AXIS Internet Dynamic DNS Service at www.axiscam.net or, for Technicalnotes on this and other topics, visit the Axis Support Web at www.axis.com/techsup