Axis 213 PTZ User Manual

Also see for AXIS 213: Installation guide Product instructions Datasheet User manual Installing

Axis 213 PTZ User Manual Manual pdf 35 page image

35AXIS 213 - Event ConfigurationScheduled EventA Scheduled event can be activated at pre-set times, in a repeating pattern onselected weekdays.How to set up a scheduled eventThis example describes how to set the PTZ Network Camera to send an emailnotification with saved images from a set time:1. Click Add scheduled on the Event types page.2. Enter a descriptive name for the event, e.g. Scheduled email.3. Set the Priority (High, Normal or Low).4. Set the Activation Time parameters (24h clock) when the event is to be active,e.g. start on Fridays at 18.00 with a duration of 62 hours.5. Set the When Activated... parameters i.e. set what the PTZ Network Camera isto do at the specified time e.g. send uploaded images to an email address.6. Click OK to save the Event in the Event Types list.Please use the online help files for descriptions of each available option.Port StatusUnder Event Configuration | Port Status there is a list that shows the status for theconnected inputs and outputs of the AXIS 213 for the benefit of the Operator whocannot access the System Options section.Example: If the Normal state for a doorbell push button connected to an input is set to Open circuit - aslong as the button is not pushed, the state is inactive. If the doorbell button is pushed, the state ofthe input changes to active.