Axis 214 PTZ User Manual

Also see for AXIS 214 PTZ: Specifications Product guide User manual Operating instructions Installation guide

17AXIS 214 PTZ• Brightness - this can be adjusted in the range 0-100.• Sharpness - controls the amount of sharpening applied to the image.• IR cut filter - turns the IR filter on or off. Alternatively, when set to Auto the filter willautomatically be switched off when the light level falls below the minimum requirement.• Use backlight compensation - this setting is used to make the subject appear clearer against e.g. abright background.Please see the online help for more information on these settings.White BalanceWhite balance is used to make the colors in the image appear the same, to compensate for the differentcolors present in different light sources.From the drop-down list, select the white balance setting suitable for the lighting used for your camera.For more information please refer to the online help .Low Light BehaviorExposure control - this setting is used to adapt to the amount/type of light being used. If set to Manual,select the desired Shutter speed from the drop-down list.Image SettingsAuto focus enabled (default setting) - this causes the camera to automatically adjust the focus to produce asharp image. Setting the sensitivity to ‘high’ will cause a drop in the frame rate (fps).MPEG-4The MPEG-4 standard provides many different coding tools for various applications in different situations.As most MPEG-4 clients do not support all of these tools, it is usual to instead define and use subsets fordifferent clients or groups of clients. These settings allow you to define the type of viewing client to use.Adjusting the maximum bit rate and setting it to variable or constant is a good way of controlling thebandwidth used by the MPEG-4 video stream. For more information on these advanced settings, please seeVideo and Audio Streams, on page 11, and the online help .Client CompatibilitySelect the correct combination of Video object type and ISMA compliant to use for your viewing client.