30AXIS 214 PTZ2. To move the window to the area to monitor, click on the text at the top of the window and drag itto the desired location. The window can be re-sized by dragging the bottom-right corner.3. Set the Object Size, History, and Sensitivity profile sliders for the window (only applies to Includewindows). A full description of each profile slider is provided below.4. To test the motion detection window, select it and then create some physical disturbance withinthe window area. Any detected motion is then indicated by colored peaks in the Activity Indicator.An alarm is only generated if the motion exceeds the tolerance defined by the black delimiter lineand the peak turns red.5. For the Java applet: Click the Save button to save the new window.Motion Detection ParametersThe parameters available for motion detection are described briefly here. Please see the online help forcomplete descriptions.Examples:• Avoid triggering on small objects in the image by selecting a high size level.• To trigger motion detection as long as there is activity in the area, select a high history level.• To only detect flashing light, low sensitivity can be selected. In other cases, a high sensitivity level is recommended.Port StatusUnder Event Configuration > Port Status there is a list that shows the status for the connected inputs andoutputs of the AXIS 214 PTZ for the benefit of the Operator who cannot access the System Options section.Example: If the Normal state for a push button connected to an input is set to Inactive - as long as the button is not pushed, the statewill be inactive. If the button is pushed, the state of the input changes to active.If there are parts of the Include window that you wish to exclude, create anExclude Window. An Exclude window is named, sized and moved in thesame way as an Include window, but no other configuration is necessary.Parameter Size History SensitivityHigh Only very large objectstrigger motion detectionAn object that appears in theregion will trigger the motiondetection for a long periodOrdinary colored objects against ordi-nary backgrounds will trigger themotion detectionLow Even very small objectstrigger motion detectionAn object that appears in theregion will trigger motion detectionfor only a very short periodOnly very bright objects against a darkbackground will trigger motion detec-tionDefault values Low Medium to High Medium to High