Page 16 AXIS 216FD/216FD-V/216MFD/216MFD-V Installation GuideResetting to the Factory Default SettingsThis will reset all parameters, including the IP address, to the Factory Default settings:1. Disconnect power from the camera.2. Press and hold the Control button and reconnect power.3. Keep the Control button pressed until the Power indicator flashes amber (this may takeup to 15 seconds).4. Release the Control button. When the Power indicator displays green (which can take upto 1 minute) the process is complete and the camera has been reset.5. Re-assign the IP address, using one of the methods described in this document.It is also possible to reset parameters to the original factory default settings via the webinterface. For more information, please see the online help or the user’s manual.Further informationThe user’s manual is available from the Axis Web site at www.axis.com or from the AxisNetwork Video Product CD supplied with this product.Tip!Visit www.axis.com/techsup to check if there is updated firmware available for yourAXIS 216FD/216FD-V/216MFD/216MFD-V. To see the currently installed firmwareversion, see the Basic Configuration web page in the product’s Setup tools.