Axis 216FD-V Installation Manual
Also see for Axis 216FD: Installation guideSpecificationsProduct guideUser manualUser manual
                                                                          | |
Contents | 
Page 6 AXIS 216FD/216FD-V/216MFD/216MFD-V Installation GuideConnect the cables1. Connect the camera to the network using a shielded network cable.2. Optionally connect external input/output devices, e.g. alarm devices. See page 14 forinformation on the terminal connector pins.3. Optionally connect an active speaker and/or external microphone.4. Connect power, using one of the methods listed below:• PoE (Power over Ethernet). If available, this is automatically detected when thenetwork cable is connected (see above).• Connect the supplied indoor power supply to the power connector on the camera.5. Check that the indicator LED:s indicate the correct conditions. See the table on page 15for further details. Note that some LEDs can be disabled and may be unlit. |
Related manuals for Axis Axis 216FD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine