Axis 223M User Manual

Also see for AXIS 223M: Specifications Product guide Installation guide Hoja de datos Specifications

Contents

60 AXIS 223M - Replacing the lensReplacing the lensIf the lens on the AXIS 223M needs to be replaced or if the camera was supplied without alens, a new lens can be fitted quickly and easily. As the AXIS 223M is designed with aC-mount, the lens supplied with your product can be replaced with any standard C or CSlens.Note: Although the lens supplied with your product can be directly replaced with any C-type lens, a CS-type lensmust be installed with an adapter for it to work with your AXIS 223M. An adapter effectively moves the lens5mm closer to the camera.Removing and attaching the lens1. Disconnect the power supply to theAXIS 223M.2. Disconnect the DC-Iris cable.3. Unscrew the lens by turning itanti-clockwise.4. CS-lens only: Untighten the stop screwand remove the C-ring. Attach the newlens to the supplied CS-adapter andreplace the C-ring.5. Screw on the new lens until it is tightagainst the metal ring at the back.6. Attach the DC-Iris cable to the camera and reconnect the power supply.7. To focus the new lens, see Setting the focus, on page 9.8. When the camera lens has been focused, tighten the top screw.Note: In the unlikely case that the camera images are still blurred after focusing the lens, loosen the screw on theunderside of the camera that holds the metal ring in place. Turn the metal ring in small increments until asharp image is obtained. Tighten the screw on the underside of the camera.Zoom puller(Tele/wide)Focus pullerDC-Iris control cableMetal ring