Axis 231D User Manual

Also see for 231D: Product instructions User manual Connection guide User manual Installation guide

19AXIS 231D/232D - Configuring the Network Dome CameraDome ConfigurationPreset Positions - a preset position is a pre-defined camera view than can be used toquickly move the camera to a specific location.From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camerato the required position. When satisfied with the camera's position, enter a descriptivename. The camera position, iris and focus settings are then saved as a preset position.The position can be assumed at any time,by selecting the preset's name from thePreset positions drop-down list. Presetpositions can be selected in Live View,from events and in Sequence mode.One position can be set as the Homeposition, which is readily accessible byclicking on the H button in both the PresetPosition Setup window and the Live Viewwindow. The position's name will have (H)added, e.g. Office Entrance (H).Sequence ModeThe Live View page can be configured to rotate through the selected preset positions, in aset order or randomly.Select the desired preset positions and enter the time in seconds to display each position(up to 59 minutes). Click Save.The Sequence buttons will appear on the Live View page to enable the viewerto start and stop the sequence mode.LimitsDefine the pan, tilt, zoom and focus limits for the AXIS 231D/232D. Movements to the leftand right, up and down can be restricted to narrow the area under surveillance. The nearfocus limit can be set to avoid focusing on objects too close to the camera.Note: Once a limit has been saved, this position can not be exceeded by the dome camera unless the values havebeen reset and saved to a greater value first (i.e. reset the default values of the mechanical restrictions).Move speed sets the speed of the camera's Pan/Tilt movements. The default setting ismaximum speed.