Axis 231D+ Installation Manual

Also see for AXIS 231D+: Specifications Product guide Connection guide User manual User manual

Contents

Page 4 AXIS 231D+/232D+ Installation GuideHard Ceiling MountReferring to the image above, follow these instructions to mount the dome camera:1. Using the supplied drill template, drill three holes in the ceiling and secure the bracket tothe ceiling with three screws.2. Slide the decoration ring and cover ring on to the AXIS 231D+/232D+.3. Insert the fixing screw holder into the mounting slot.4. Connect the connection module cable to theconnection module.5. Connect the Ethernet cable and connection module tothe AXIS 231D+/232D+.6. Connect the power cable (24V AC) to the connectionmodule and check that the power and network LEDslight up green.7. Mount the dome body onto the bracket and rotate itclockwise. Make sure the screw hole on the side ofdome is aligned with the bracket. Tighten the fixingscrew to secure the dome.8. Attach and secure the cover ring and decoration ringto the bracket.9. The hardware installation is now complete, proceed to Setting the IP address, on page 7to install the AXIS 231D+/232D+ on your network.moduleNetworkConnectionconnectorNetworkIndicatorPowerIndicatorfixing screwMounting slot forControlbuttonconnectorSerial numberS/NSide viewDecorationringCeilingbracketCover ringRear view24V ACPS GNDConnection module cable connectorConnection module