Axis 242S IV User Manual
                                                                         | |
Contents
| 
9AXIS 242S IV - Using the video serverThe Live View pageIf your AXIS 242S IV has been customized to meet specific requirements, the buttons andother items described below may or may not be displayed on the Live View page. Thefollowing provides an overview of each available button:To resize the displayed image, click the View Size buttons: half-size(x1/2), full-size (x1), x2 or x4. This will not change the resolution of theimage (not available in Sequence Mode).The Video Format drop-down list allows the video format on the LiveView page to be temporarily changed.Pulse - click this button to activate the portfor a defined period of time, e.g. to switch ona light for 20 seconds.Active/Inactive - click these buttons tomanually start and stop a connected device,e.g. switch a light on/off.The Output buttons controlan output directly from theLive View page. Thesebuttons are configuredunder Setup > Live ViewConfig > Layout.The IV buttons are used to configure and view the status for the currentlyrunning IV module.These buttons start/stop the Sequence Mode. This mode is created in Setup >Live View Config > Sequence mode and automatically displays the viewfrom 2 or more video sources at set intervals.From the Source list, select the desired video image(s). The list cancontain internal video sources and external video sources.The trigger buttons trigger an event directly from the Live View page. Thesebuttons are configured under Setup > Live View Config > Layout. Click thesebuttons to manually start and stop events.Use the Snapshot button to capture a snapshot of the image currently beingdisplayed in the window. Right-click on the image to save it in on yourcomputer.The AMC viewer toolbar (AXIS Media Control) is available in Microsoft InternetExplorer only and displays the following buttons: |
Related manuals for Axis 242
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine