Axis 242S IV User Manual
                                                                         | |
Contents
| 
6 AXIS 242S IV - Product descriptionFront panelVideo input Control buttonMic In & Line InVideo outputS-Video (Y/C) inputDIP switchDSP & IV LED indicators LED indicators for Network, Status & PowerMic In & Line In - 2 separate inputs for Line In and Mic In, respectively. Note that theseinputs are used for internal audio analysis only.Video Input - The video input uses a coax/BNC connector. Physical connections madeusing 75 ohm coaxial video cable have a recommended maximum length of 800 feet (250meters).S-Video (Y/C) input - For direct connection of a Y/C video source.Video Output - Video for debugging purposes is available on this output when the DigitalSignal Processor (DSP) is running an Intelligent Video module.Control Button - Press this button to restore the factory default settings, as described inResetting to the factory default settings, on page 48, or to install using AXIS InternetDynamic DNS Service (See the Axis Video Server Installation Guide).LED indicators - See page 8.DIP switch - The DIP switch is for line termination of the video input. Slide the switch tothe right to enable. |
Related manuals for Axis 242
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine