Axis 250S User Manual

Also see for 250S Blade: Specifications Installation guide User manual User manual

Contents

Axis 250S User Manual Manual pdf 31 page image

AXIS 250S User’s Manual Administration & System Options 31Manual IP ConfigurationIP Address - Specify a unique 32-bit IP address for your server, to establish communicationwith your network. Written as four numbers separated by periods, each number within theaddress must be in the range 0 - 255. For example: 172.21.1.200Note: IP addresses can be assigned at random within isolated networks, provided thateach given address is unique. To avoid unnecessary clashes, it is strongly recom-mended that you contact your network administrator prior to assigning an IPaddress for your product.Default Router - Specify the default router (Gateway) used for connecting to other networksand network segments.Subnet Mask - Specify the subnet mask for the subnet the AXIS 250S is located on.Host Name - If you are running a DNS server on your network and wish to connect to theAXIS 250S using a name, enter the product’s host name here. The host name is usually thesame as the assigned DNS Name. A host name is always the first part of a Fully QualifiedDomain Name and is always one word, with no period. For example, myserver is the hostname in the Fully Qualified Domain Name myserver.axis.com.DNSDomain Name - Enter the name of the domain your AXIS 250S belongs to.Primary DNS Server - Enter the IP address of the primary DNS server. This specifies the serverthat normally provides the translation of domain names to IP addresses on your network. Ifthe server is not able to resolve a domain name immediately, it will then distribute thedomain name query to other DNS servers on the network.Secondary DNS Server - Specify the IP address of the secondary DNS server. This will be usedif the primary DNS server is unavailable.HTTPPort number - Enter the HTTP port the AXIS 250S will use. The default setting is 80. Alterna-tively, any port in the range 1024-65535 may be used, but check first with your systemadministrator before changing the default setting. See also the special considerations con-cerning the firewall settings, on page 28.