Axis 250S User Manual

Also see for 250S Blade: Specifications User manual Installation guide User manual

Contents

Axis 250S User Manual Manual pdf 23 page image

AXIS 250S User’s Manual Operating the AXIS 250S 23Important!• Send email notification to - Check this box to enable the sending of email to notify recipientsof events. Enter the email address(es) in the field provided. Multiple addresses must be sepa-rated by commas (,) To add your own text, check the Include text box and enter your text. Notethat a mail server must be configured in the SMTP network settings.• Send HTTP notification - This method sends a notification to an HTTP server. Select the nameof the server. Note that the destination server must first be configured in Notification Servers.See the following page.• Send TCP notification - This method sends a TCP/IP notification. The destination server mustalso first be configured in Notification Servers.Click OK to save the event type setup.Upload ServersClicking this link will open the list of FTP servers currently configured in the server. Thelisting shows the name and address of the server, as well as the upload path and user name.Adding an Upload ServerClick the Add button. This opens the Upload Server Setup dialog. The followinginformation should then be provided for the new server.• Name - This can be any descriptive name you like.• Network address - Enter the IP address or host name of the server. To use a host name, aDNS server must be specified in the TCP/IP network settings.• Upload path - Specify the path to the directory where the uploaded images will be stored.If this directory does not already exist on the FTP server, there will be an error messagewhen uploading.• Additional information - In this field you can add extra information about the server. Forexample, if the saved video files can also be accessed via a UNC address (e.g.\\video\file1.mpeg), then you could add text providing this address. This information will beincluded in email sent by events that use this server.• The user name and password you use to log on to the server.When finished, you can test the setup by clicking the Connect button. The results of theconnection test will then be displayed in a message box.Please keep in mind that the output port can be controlled by more than one event type. This may meanthat the port is the “wrong” state if one or more event types that activate the port are triggered oneafter the other. Using more than one event type to control the output is not recommended.