Axis 250S User Manual
Also see for 250S Blade: SpecificationsUser manualInstallation guideUser manual
                                                              | |
Contents
| 
The System Options AXIS 250S User’s Manual38The Factory Default SettingsIn certain circumstances, it may be necessary to reinstate the Factory Default settings foryour AXIS 250S. This is performed in one of two ways:• By clicking the Restore button from the Maintenance page under System Options. Thisaction will reset most of the unit’s parameters but will save the IP-address, the Subnetmask and the Default Router.• By pressing the Factory Default Button, located on the front panel. This option will resetALL the parameters currently configured in the unit, i.e. network settings, events, etc.Follow the instructions below to reinstate the product factory default settings using theControl Button:1. Switch off the AXIS 250S by disconnecting the power supply.2. Press and hold the Factory Default Button pressed, and reconnect the power.3. Keep the Factory Default Button pressed until the Status Indicator displays yellow (notethat this may take up to 15 seconds), then release the button. When the Status Indicatordisplays green (which can take up to several minutes) the AXIS 250S will then havebeen reset to its original factory default settings. |
Related manuals for Axis 250S Blade
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine