Axis 27147R1 Installation Manual
Also see for 225FD: SpecificationsProduct guideUser manualInstallation guideSpecifications
                                                                          | |
Contents
|
Page 14 AXIS 225FD Installation GuideAdjusting the image1. Open the Live View page in the Web interface and make the following adjustments:2. Loosen the pan adjustment ring and tilt adjustment screws. Hold the lens while turningthe pan adjustment ring, otherwise the lens may rotate with the lock ring and damage ordisconnect the cable.3. Turn the lens to the desired direction. Do not turn the lens more than 360° as this maycause the internal cables to disconnect.4. Once satisfied, gently tighten the pan adjustment ring and tilt adjustment screws tosecure the camera’s position.5. Turn the image balance ring to set the image to the correct angle.6. Loosen the zoom puller counterclockwise, rotate the zoom ring and determine the desiredzoom position.Pan adjustment ringImageZoomFocus pullerTiltscrew3 tamper-proofscrewsUnit casingDome casingbalanceringadjustmentTiltscrewadjustmentpuller |
Related manuals for Axis 225FD
manualsdatabase
Your AI-powered manual search engine