Axis 27978R1 User Manual
                                                                  | |
Contents
| 
Basic Installation12 AXIS OfficeBasic User’s ManualSection 3 Basic InstallationConnecting the HardwareAXIS OfficeBasic1. Make sure that your printer is switched off and that the Power Adapter isdisconnected from the print server.2. Locate the serial number, found on the underside label of the print server,and write it down. You will need this number to configure the print server.Example: S/N: 00408c181cf03. Connect the printer to the AXIS OfficeBasic:• Connect the printer to the USB port using the USB cable, and/or• Connect the printer directly to the LPT port or using a printer cable.4. Connect the print server to the network using a twisted pair (category 5 orbetter) RJ45 cable, 10baseT or 100baseTX.5. Switch on the printer and make sure it is ready for use.6. Connect the Power Adapter to the print server. The Power indicator will lightup. When the Network indicator starts to flash, the print server is correctlyconnected to the network.7. Wait 1 minute. Then press the test button on the print server once. A testpage will be printed on the connected printer. The test page will show a listof the most important parameters.PowerIndicatorUSB printer port (USB1)Test buttonNetworkIndicatorPower AdapterconnectorEthernet connectorParallel printer port (LPT1) |
Related manuals for Axis 27978R1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine