Axis 540 User Manual

Also see for 540 series: Specification User manual User guide Quick installation guide User manual

Contents

Axis 540 User Manual Manual pdf 33 page image

Adding Printers in MacintoshAXIS 540+/AXIS 560 33Section 1 Adding Printers in MacintoshHaving connected the AXIS 540+/AXIS 560 to your network, this section nowdescribes how to set up your print server for printing in Mac OS X and earlierMacintosh environments using AppleTalk.If you intend to use the print server in a multi-protocol environment, refer tothe chapters pertaining to the respective operating systems in this manual.Installation in Mac OS XThis section describes setting up your print server for printing in the Mac OS X.1. Start Print Center (from Go | Applications | Utilities | Print Center)2. Select Printers | Add Printer...3. From the Printer List dialog, select AppleTalk.4. Now, the port of your print server will appear in the list of available printers.The port is shown as _. Example: AXIS100086_LPT1.Select the print server port you want to use.5. Select an appropriate printer driver for your printer from the Printer Modeldrop-down list. If the printer is not available in the list, select Generic.(You can also browse for a printer driver on your computer or network byselecting Other... from the list.)6. Click Add to complete the installation.Note:If you want to print using LPR, select:1. Printers | Add Printer...2. From the Printer List dialog, select LPR printers using IP.3. Enter the IP address or host name of the print server in the LPRprinter’s Address field. You must uncheck the Use Default Queue onServer check box and enter a Queue Name:Physical ports: LPT1, LPT2, COM1Logical printer ports: PR1, PR2, PR, PR4, PR5, PR6, PR7, PR84. Choose a printer driver from the Printer Model list and click Add tofinish.