Setting Up - NetWare38 AXIS 540+/AXIS 560Section 2Setting Up - NetWareThis section describes how to continue the installation of the AXIS 540+/AXIS560 in the NetWare environment. Identify which transport protocol you arerunning on your network and which installation method you should use.Continue the installation by selecting the appropriate installing instructionsfrom the table below:See “NetWare Administration” on page 64. for information on Novell’sadministration tools.If you intend to operate your AXIS 540+/AXIS 560 in a multi-protocol, mixedenvironment, you should also proceed to the other relevant sections in thismanual.InstallationmethodTransportprotocol ActionNDPS TCP/IPIPX/SPXSee “Setup using NDPS” on page 39.- Public Access Printers, on page 40- Controlled Access Printers, on page 44iPrint iPrint over LPR See “Setup using iPrint” on page 53.andSee “Install a printer using AXIS LPR Gateway ConfigurationSnapin” on page 55.iPrint over IPP See “Setup using iPrint” on page 53.andSee “Install a printer with AXIS IPP Gateway ConfigurationSnapin” on page 55.Queue-basedprintingIPX/SPXBasicConfigurationTo install using the AXIS NetPilot Installation Wizard,See “Basic Setup with AXIS NetPilot” on page 58..IPX/SPXAdvancedconfigurationIf you need a more advanced installation that is not covered bythe AXIS NetPilot Installation Wizard,See “Advanced Installation using AXIS NetPilot” on page 60..
