Section 6: Setting Up - OS/2AXIS 540/640 User’s Manual 73Section 6 Setting Up - OS/2Having connected the AXIS 540/640 to your network, this sectionnow describes how to set up your AXIS 540/640 for printing in theOS/2 environment.If you intend to operate your AXIS 540/640 in a multiprotocolenvironment, you should also proceed to the other relevant sections inthis manual, namely:Section 4 Setting Up - NetWareSection 5 Setting Up - WindowsSection 7 Setting Up - MacintoshSection 8 Setting Up - UNIXSection 9 Web Based ManagementUsing the AXIS Print Utility for OS/2The installation and setup operations are performed with the AXISPrint Utility for OS/2. You should install this utility now if you havenot already done so - see the instructions on the OS/2 Utilities disklabel.Should you require to change the default name of your AXIS 540/640or amend any of default parameters, use the AXIS NetPilot™ fromany Windows platform that is connected to your network, orWinOS/2 window under OS/2.The AXIS Print Utility for OS/2 is not needed on the client platformswhen using a client-server configuration.
