Setting Up - NetWare62 AXIS 5400+ / AXIS 5600+ User’s ManualNotes:10. If you want to define a remote printer number slot manually, check theManual box and type the desired number in the box.11. Click the OK button to return to the Network Environments window.Basic Queue-based printing over IPAxis print servers with software version 6.0 or later allow users to print in aPure IP environment using traditional queue-based printing (which usually usesthe IPX transport protocol). Note that only NDS queue-based printing issupported.In the NetWare Pure IP environment, you must use the NetWare Administratorto create the printer, print server and queue objects.Installing theAXIS 5400+/AXIS5600+Follow the instructions below to install the AXIS 5400+/AXIS 5600+ in theNetWare Pure IP environment:1. Start the Configuration Wizard from the User mode in the AXIS5400+/AXIS 5600+ Web interface.2. Click your way through the Wizard until reaching the NetWare page.3. Set the parameters on the NetWare page:• PSERVER NDS Tree (example: NW5TREE)orPSERVER NDS File Server: (example: FILESERVERNAME)• PSERVER NDS Distinguished Name:(example: AXISXXXXXX., where is the containerwhere you want to create your print server)• You cannot type or edit the name manually.• Make sure that you have PSERVER.NLM running if you selected Remote Printer Mode in step8.
