Axis 540+ User Manual

Also see for 540 series: Specification User manual User manual Quick installation guide User manual

Axis 540+ User Manual Manual pdf 17 page image

Setup for Windows 3.1 & WfW AXIS 540/640 User’s Guide16Setup for Windows 3.1 & WfWTCP/IP PrintingTo enable TCP/IP printing in Windows 3.1 and Windows for Workgroupsenvironments, it is recommended that you use a shareware LPR spooler that can bedownloaded from ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/.NetBIOS/NetBEUI PrintingAXIS Print Utility for Windows is the preferred tool for NetBIOS/NetBEUI printingin Windows 3.1 and Windows for Workgroups environments.Install the AXIS Print Utility for Windows software, if you have not already done so.It is available in the software\prt_srv\utility\axpuw\1.04 folder on the AXIS OnlineCD. It can also be downloaded from the Axis WWW home page athttp://www.axis.com/.Peer-to-peer printing - This print method is recommended for smallernetworks and requires that all users install the AXIS Print Utility for Windows ontheir workstations. Follow these steps to install your AXIS 540/640 for peer-to-peerprinting at a Windows for Workgroups or Windows 3.1 workstation:1. Double-click the AXIS Print Utility icon.2. In the Port menu, click Add. In the NPS Port list, select the AXIS 540/640 portto be installed. The port appears as .LP1, where is either AXfollowed by the last six digits of the AXIS 540/640 serial number or a name youhave previously given the AXIS 540/640. For example AX100B35.LP1 orDevDept.LP1.3. Accept or change the suggested Windows port name, and type any comments inthe Description field. Make a note of the Windows port name as you will needthis later. Click OK to install the Windows port.4. In the Port menu, click Connect to bring up the Windows Printers dialog.5. Select a printer driver from the list of Installed Printers, or click Add>> to installa new driver. Click Connect...6. Select the Windows port name, defined in step 3, from the Ports list.7. Click OK to close the Connect dialog, and Close to close Printers.Windows