Axis 540+ User Manual

Also see for 540 series: Specification User manual User manual Quick installation guide User manual

Axis 540+ User Manual Manual pdf 3 page image

Safety notices AXIS 540/640 User’s Guide2Safety noticesTake some time to read through the safety notices before installing the AXIS 540/640. Please observe all safetymarkings and instructions when using this product.Caution! - must be observed to avoid loss of data or damage to your equipment.Important: - must be observed to avoid operational impairment.Do not proceed any of the above notices, until you have fully understood the implications.Electromagnetic Compatibility (EMC) USA - This equipment generates and radiates radio frequencyenergy and if not installed and used in accordance with the instruction manual, may cause interference to radiocommunications. It has been tested and found to comply with the limits for a Class A computing device pursuant toSubpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interferencewhen operated in a commercial environment. Operation of this equipment in a residential area is likely to causeinterference in which case the user at his own expense will be required to take whatever measures may be required tocorrect the interference. Shielded cables should be used with this unit to ensure compliance with the Class A limits.Europe - This digital equipment fulfils the requirements for radiated emission according to limit B ofEN55022/1994, and the requirements for immunity according to EN50082-1/1992 residential, commercial, andlight industry (Compliance is not valid for unshielded network and printer cables).Liability - Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions,please inform your local Axis office, which can be found on the cover of this document. Axis Communications ABcannot be held responsible for any technical or typographical errors and reserves the right to make changes to theproduct and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard tothe material contained within this document, including, but not limited to, the implied warranties of merchantabilityand fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental orconsequential damages in connection with the furnishing, performance or use of this material.Year 2000 Compliance - Axis Communications warrants that all versions of the AXIS 540/640 with softwareversions 5.48 or later are Year 2000 compliant.Axis’ Trademarks - NetPilot, ThinWizard, ThinServer.Other Trademark Acknowledgments - Adobe Acrobat Reader, Apple, DOS, Ethernet, Hewlett-Packard,HP, HP JetAdmin, HP Web JetAdmin, LAN Manager, LAN Server, LANtastic, Macintosh, Microsoft, NovellNetWare, OS/2, UNIX, Windows, are registered trademarks of the respective holders.Support Services - Should you require any technical assistance, please contact your Axis dealer. If your questionscannot be answered immediately, your Axis dealer will forward your queries through the appropriate channels toensure you a rapid response.If you are connected to Internet, you can find on-line manuals, technical support, software updates, applicationsoftware, corporate information, etc., on any of the locations listed below.WWW: http://www.axis.comFTP server: ftp://ftp.axis.com/pub/axisAXIS 540/640 User’s Guide Revision 3.2Part No: 17148 Date: January 2000Copyright © Axis Communications AB, 1998 - 2000NetWareUNIX WindowsOS/2Macintosh