Adding Printers in MacintoshAXIS 540+ / AXIS 560 User’s Manual 35Section 5 Adding Printers in MacintoshHaving connected the AXIS 540+/AXIS 560 to your network, this sectionnow describes how to set up your print server for printing in Mac OS Xand earlier Macintosh environments using AppleTalk.If you intend to use the print server in a multi-protocol environment,refer to the chapters pertaining to the respective operating systems in thismanual.Bonjour Printing in Mac OS XBonjour is available from Mac OS X 10.2 and up. Bonjour is enabled bydefault in the print server. You can alter the Bonjour parameters from theprint server’s Web interface: select Admin | Network Settings | DetailedView | TCP/IP Network.1. From the Apple menu, select Go | Applications | Utilities and start thePrint Center or the Printer Setup Utility.2. Click Add in the Printer List.3. From the drop-down list, select Bonjour.4. High-light the printer you want to install. The print server’s default nameis AXISxxxxxx Network Print Server (where the xs represent the last sixdigits of the print server’s serial number) followed by the ports available.Example: AXIS610282 Network Print Server_LPT1.5. Select printer manufacturer and model from the drop-down list. (For someprinter drivers, Printer Manufacturer and Model are selected automatically.)