Adding Printers in NetWare42 AXIS 540+ / AXIS 560 User’s ManualSection 6 Adding Printers in NetWareThis section describes how to continue the installation of the AXIS540+/AXIS 560 in the NetWare environment. Identify which transportprotocol you are running on your network and which installation methodyou should use. Continue the installation by selecting the appropriateinstalling instructions from the table below:See “NetWare Administration” on page 66 for information on Novell’sadministration tools.If you intend to operate your AXIS 540+/AXIS 560 in a multi-protocol,mixed environment, you should also proceed to the other relevantsections in this manual.InstallationmethodTransportprotocol ActionNDPS TCP/IPIPX/SPXSee “Setup using NDPS” on page 43 and- “Public Access Printers” on page 44- “Controlled Access Printers” on page 48iPrintiPrint over LPRSee “Setup using iPrint” on page 57 and“Install a printer using AXIS LPR Gateway Configuration Snap-in”on page 59iPrint over IPPSee “Setup using iPrint” on page 57 and“Install a printer with AXIS IPP Gateway Configuration Snap-in”on page 59Queue-basedprintingIPX/SPXBasicConfigurationTo install using the AXIS NetPilot Installation Wizard,see “Basic Setup with AXIS NetPilot” on page 61.IPX/SPXAdvancedconfigurationIf you need a more advanced installation that is not covered bythe AXIS NetPilot Installation Wizard,see “Advanced Installation using AXIS NetPilot” on page 62.
