AXIS 5470e/570/670e User’s Guide Setup for Macintosh 37Setting the IP addressFollow the step-by step procedure to set the IP address, enabling access to the AXIS5470e/570/670e via any standard Web browser:1. Open the Chooser and select a network printer driver, any LaserWriter will do.2. Select the Axis printer port which name ends with "_CFG" and close the Chooser.3. Open a text editor, e.g. SimpleText and write a text file containing the following:INT_ADDR: Example: INT_ADDR: 171.16.2.1434. Print the above text file. The settings will be stored in the print server.5. Open the Chooser and select the printer port you wish to use for printing documents. Closethe Chooser when you are finished.Note:Changing the AXIS 5470e/570/670e parameters in AppleTalk.In AppleTalk, you can change a limited number of the parameters of the AXIS 5470e/570/670e.You can:• enable and disable binary data transfers for your printing• select the type of binary transfer protocol to use• specify the AppleTalk printer type• set the IP address(By assigning an IP address to your AXIS 5470e/570/670e, you have access to all of print server’sparameters via any standard Web browser or via FTP.)The _CFG port disappears 60 minutes after the AXIS 5470e/570/670e has been powered on. Ifyou want it to reappear, you must restart the AXIS 5470e/570/670e.
