Axis 5470 User Manual
                                                | |
Contents
| 
Connecting the Printer to the Network AXIS 5470e/570/670e User’s Guide8Connecting the Printer to the NetworkFollow the instructions below to connect your printer to the network:1. Switch off the printer and disconnect the AXIS 5470e/570/670e external power supply.2. Locate the serial number, found on the underside label of the AXIS 5470e/570/670e, andwrite it down. You will need this number during the network configuration.Note:3. AXIS 5470e - Connect the AXIS 5470e to your printer, either directly to the parallel printerport, or using the optional printer cable extension with the optional velcro ribbons.AXIS 570/670e - Connect the printer to the LPT1, LPT2 or the COM1 port on your AXIS570/670e using an appropriate printer cable.4. Connect your AXIS 5470e/570/670e to the network using an appropriate network cable. Ifyou are connecting the AXIS 5470e to a Fast Ethernet network, the twisted pair cable must beof category 5 or better.5. Switch on the printer and connect the external power supply to the AXIS 5470e/570/670e.The power indicator lights up. If the network indicator starts to flash, the AXIS5470e/570/670e is correctly connected to the network.6. Press and release the test button on the AXIS 5470e/570/670e to print a test page. If the AXIS5470e/570/670e is correctly connected to the printer, the AXIS 5470e/570/670e internal testpage will be printed.Each AXIS 5470e/570/670e is pre-configured with a unique node address that is identical to itsserial number. |
Related manuals for Axis 5470
manualsdatabase
Your AI-powered manual search engine