Axis 5600+ User Manual
Also see for 5600+: SpecificationUser guideInstallation guideUser guideUser manual
                                                                                                                                                                                                     | |
Contents
| 
NetWareUNIX WindowsOS/2MacintoshAXIS 5600+ Userís Manual20Connecting the HardwareFollow the instructions below to connect a printer to the network viathe AXIS 5600+ print server.Caution! The AXIS 5600+ external power supply you are using must be markedwith the correct voltage! Refer to Package Contents, on page 15.1. Make sure that the printer is switched off and that the AXIS5600+ external power supply is disconnected.2. Locate the serial number, found on the underside label of the AXIS5600+, and write it down. You will need this number later duringthe network configuration. Example: S/N: 00408c181cf03. Connect the printer to the LPT1, LPT2 or the COM1 port on the AXIS5600+ using an appropriate printer cable.4. Connect your AXIS 5600+ to the network using a twisted paircategory 5 cable (10baseT and 100baseTX).5. Switch on the printer. Your printer must be ready for use when youswitch it on.6. Connect the external power supply to the AXIS 5600+. The powerindicator lights. If the network indicator starts to flash, the AXIS5600+ is successfully connected to the network.7. Press and release the test button on the AXIS 5600+ to print a testpage. If the printer and the AXIS 5600+ are correctly connected, theAXIS 5600+ internal test page will be printed.MAC address(Ethernet address)exampleìS/Nî can also appear as ìSer. No.î or ìSerial no.î |
Related manuals for Axis 5600+
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine