AXIS 70U/7000 User’s Guide Configuring the AXIS 70U/7000 15Configuring the AXIS 70U/7000This section is targeted specifically to users responsible for the administrationof the AXIS 70U/7000. Administrator(s) are granted with high-level privilegesthat are denied to the ordinary user(s).The following settings must be specified by the administrator before theAXIS 70U/7000 can be used for distributing scanned documents on yournetwork:Network settings: Define the parameters for TCP/IP and SMTP protocols.Destinations: Specify the e-mail address to which you wish to send yourdocument.Notes:Accessing the Administration ToolsThe Web based administration tools provide a convenient method formanaging destinations, profiles, defining the network protocol settings,establishing user privileges, authentication etc. The AXIS 70U/7000Administration pages are password protected and available to theAdministrator(s) only.Follow the instructions below to access the Administration tools using astandard Web browser:1. Start your Web browser.2. Enter the name or IP address of your AXIS 70U/7000 in the loca-tion/address field. Example: http://192.168.0.90The AXIS 70U/7000 home page is displayed.• If you have an active DHCP or BOOTP server on your network, most network settings will be setautomatically. However, it is strongly recommended that you verify the settings from the Webbrowser interface.• When installing the AXIS 70U/7000 for the first time, it is recommended that the Administratorretains default system settings, profiles and paper sizes. The settings can be optionally custom-ized at a later date, once you are familiar with the unit operation and functionality.• Refer to applicable parts of the AXIS 70U/7000 User’s Manual for information on the settingsfor profiles.• It is possible to enable user authentication to restrict use of the AXIS 70U/7000 to validatedusers only. For more information, please refer to the AXIS 70U/7000 User’s Manual at the AxisWeb site http://www.axis.com