Axis 7000 User Manual

Also see for 7000: User manual Installation guide User manual User manual Installation information

Axis 7000 User Manual Manual pdf 21 page image

AXIS 70U/7000 User’s Guide Using the AXIS 70U/7000 21Note:5. Optionally, press Menu to change the default scanning parameters.You can select temporary settings for profile, paper size and double-sided.Use to select the desired value.Note:6. Insert a single page on the flatbed or a stack of paper into the sheet feederof the attached scanning device.For one single page or a stack of paper in the sheet feeder:a. Press Send to scan and send the image to the selected destination.For several separate pages or stacks of paper:a. Press Add Page to scan each page/stack.b. Insert the next page/stack and press Add Page again.Repeat the procedure until all your pages are scanned.c. Press Send to transmit the image to the selected destination.7. During the scanning this message is displayed:8. When you have pressed Send and the transfer of the scanned image iscompleted, the AXIS 70U/7000 is released for other users.Note:Adding E-mail DestinationsThe e-mail list resident within the AXIS 70U/7000 is initially created by youradministrator. If you want to send a document to an e-mail destination that isnot featured in the list, you can add a temporary e-mail destination using astandard PC keyboard.The image will always be sent to the destination currently shown, whether explicitly selected or not.So, be careful not to transmit images to an unwanted destination!Press the Cancel button to reset all temporary settings to the default values. All selecteddestinations will be cleared.Scanning #1please waitThe AXIS 70U/7000 keeps all temporary settings in memory for one minute after the last scanningjob or until user has logged out, and then returns to its default settings.