AXIS 70U/7000 User’s Manual Troubleshooting 129FTP Follow these steps to restore the default settings using FTP:1. Log in to the Document Server with the commandftp , where is thename or IP address assigned to your Document Server.2. You will be prompted for user id and password. Use the user idroot, which has the default password pass3. Issue the command get defaults to restore the default settings.The unit now restarts automatically.4. Log out using the command quit, bye or exit depending onyour FTP version.The Document Server will now restart with the factory defaultsettings.Front Panel Indicator ConditionsThe Power LED is hardware controlled and should always remainon when power is connected to the Document Server . The remainingLEDs are all software controlled.Normal Conditions This table shows the front panel indicators during normalconditions:Event StatusLEDBusyLEDNetworkLEDRemarksPower up On On On Initial power to unit.On Off Off Memory test.Flash On Off Self test in progress.On Off Flash Network LED flashes when networktraffic is present.Sending On On FlashIdle On Off Flash Network LED flashes when networktraffic is present.Flash loading Blink Blink Blink During Flash loading, the Network LEDblinks quickly.
