Axis Camera Station User Manual

Also see for Camera Station: Installation guide Quick installation guide User manual User manual User manual

44AXIS Camera Station - Event Configuration WizardRaise alarm action1. In the New Rule dialog, Actions step, click Add and select Raise alarm.2. Type a title for the alarm message and a description.An alarm procedure containing instructions for the camera operator can be included in the message. The alarm procedure isan uploaded file, for example a text or image file.3. To include an alarm procedure, check the box under Alarm procedure, click Upload and browse to locate the file.4. Click OK to save.Send e-mail action1. In the New Rule dialog, Actions step, click Add and select Send e-mail.2. Enter the e-mail addresses that alarm messages should be sent to. Under New Recipient, choose if the addressshould be in the To, Cc or Bcc field of the e-mail and enter the e-mail address.3. Click Add to enter the e-mail address into the Recipients box.4. Enter an appropriate description for the e-mail in the Subject field.5. Enter a short message to the recipient.6. To attach camera snapshots, click Select Cameras... and choose the cameras to include snapshots from.7. Click OK to save the e-mail.Note: E-mails cannot be sent by AXIS Camera Station if an SMTP server has not been added. Go to SMTP servers underOptions.Setting a scheduleThe next step is to set a schedule for the event.Click Next to go to the Schedule section. Select Always to let the rule be active at all times or select a Custom Schedule fromthe drop-down list. For more information about schedules, see Set up schedules, on page 40.